Modified on Tue, 10 Mar at 2:23 PM

Hollywood Sport Rider E-Bike Rack | User Guide

In this article: You’ll learn how to assemble and install the Hollywood Sport Rider E-Bike rack onto your vehicle’s hitch.

This Article Applies to the Following Bikes

Difficulty

★★☆ Medium

Estimated Time

15 - 30 Min

Before You Start

Tools you will need

• Wrenches (included in your bike rack kit)

Preparation

• Make sure you have enough open space in your garage or workspace to lay out and assemble the rack components.
• Ensure your vehicle has a compatible hitch receiver so you can install the rack securely.
• Park your vehicle on a level surface, engage the parking brake, and turn the vehicle off before starting.

Watch the Full Step-by-Step Video Guide

Manufacturer Assembly Instructions

For full and detailed assembly instructions, please follow the official installation guide provided by Hollywood Racks. Their documentation includes the most current steps, diagrams, and safety guidance for proper installation.

View the manufacturer’s assembly guide here.

Transporting a MOD Easy Sidecar

If your MOD Bike has a Sidecar attached, you will need the Sidecar Adapter to transport it. Purchase the adapter here.

For step-by-step instructions, see: Hollywood Sport Rider E-Bike Rack with Sidecar Adapter | User Guide

FAQs

• Do the hooks lock on this bike rack?
  Yes, this bike rack comes with locking hooks as well as a locking cable and a locking hitch pin, all with the same key number.
• How many bikes can this rack carry?
  It can carry up to 2 bicycles.  There is an expansion kit that allows the rack to carry up to 4 bikes.
• How heavy of a bike can I carry?
  You can carry bikes up to 80lbs with the Sport Rider. 50 lb. bikes on the Plus 2 Add-On rack.
• Is there a ramp for this rack?
  No, there is no ramp option for the Sport Rider.
• What is this bend on my main beam?
  That’s supposed to be there - it’s the help with ground clearance for the back of the rack as one drives in and out of driveways and the like. The rack isn’t bent - it’s designed that way.

Warning

⚠️ Important Safety & Liability Notice

Always ensure the rack is properly installed and securely attached to your vehicle’s hitch before loading bikes or driving. Check that all hitch pins, clamps, straps, and locking mechanisms are fully tightened.

Do not exceed the rack’s weight capacity or your vehicle hitch’s rated load. Improper installation, loose hardware, or overloading may result in rack failure, bike damage, or injury.

Recheck all connections before each trip and periodically during long drives, especially after rough roads.